Glossary
Porting a loan means taking your existing home loan - rate, features and all - to a new property when you move. It keeps a below-market rate and skips the break costs; it does not skip the re-approval.
Portability is a home loan feature that lets you transfer your existing loan to a new property when you sell and buy again. The ported portion keeps its rate and features, which matters most when the old rate is below the current market. The process skips the break costs that apply to exiting a fixed loan mid-term. The loan must be re-secured against the new property, and the lender re-assesses the borrowing for anything above the ported balance.
The re-assessment is the part people miss. Porting is not automatic: the lender re-values the new property, re-checks serviceability against current rates, and prices any top-up at today's rates. A 3.19 percent fixed loan ported to a larger home keeps 3.19 on the ported balance and pays the market rate on the extra. The fixed vs variable rate entry covers the rate structures, and porting is the feature that moves one to a new address.
The mechanism is a substitution of security. The old property is sold, the ported balance is discharged from it and re-secured against the new one, and the loan account - with its rate, offset and features - continues unchanged for the ported amount. Because the loan is not exited, no break costs apply: exiting a 3.19 percent fixed loan two years early would otherwise cost the bank's economic loss, and the mortgage break costs entry covers the arithmetic that porting skips.
The re-approval is the second mechanism. The lender re-values the new property and re-checks serviceability on the total borrowing at current rates before approving the port and the top-up. A 3.19 percent fixed rate on $400,000 ported to a $700,000 purchase keeps the fixed rate on $400,000 and prices the $300,000 top-up at roughly 6.2 percent - the blended rate on the total sits near 4.5 percent, and the comparison rate entry covers the fees that sit on top of it. Some lenders charge a portability fee of a few hundred dollars and cap the ported balance at the original loan amount.
The decline is the third mechanism. If the lender's serviceability check fails on the larger borrowing - the new loan is bigger, the rates are higher, the household circumstances have changed - the port dies with the approval, and the alternatives are a smaller top-up or refinancing the whole loan at market rates. The old rate was only ever portable with the lender that set it.
For an Australian reader, portability is worth the most when the rate cycle has moved against you - which is the state the market spends most of its time in. A fixed rate locked below the current market is an asset, and breaking it mid-term costs the bank's economic loss in cash. Porting keeps the rate, skips the break cost and prices only the extra borrowing at today's level. On a larger home that is the difference between a blended 4.5 percent and a full 6.2 percent. The fixed vs variable rate entry covers the structures.
A colleague named Brent (yes, that Brent) assumed porting was automatic, sold and bought a bigger place. The lender's serviceability check ran on the new total at current rates, and the port died on a shortfall in the assessment. His fallback was refinancing the entire loan at 6.2 percent. The highest-leverage thing most Australians can do is get the port approved in writing before the old property's sale goes unconditional. Treat portability as a feature to check at application, not at moving day.
A $400,000 loan fixed at 3.19 percent has two years left when the owner moves to a $700,000 home. The ported $400,000 keeps 3.19 percent and the $300,000 top-up prices at 6.2 percent - a blended rate of roughly 4.5 percent on the total. Breaking the fixed loan instead would cost the bank's economic loss, quoted at $17,000 on a similar two-year break. The port skips the $17,000 and prices only the extra $300,000 at the market.
The ported $400,000 at 3.19 percent costs roughly $1,730 a month on a 30-year term; the $300,000 top-up at 6.2 percent costs roughly $1,840 - about $3,570 combined. Refinancing the whole $700,000 at 6.2 percent costs roughly $4,280 a month - about $710 more. The ported rate is the difference, and the refinance calculator runs both sides of the arithmetic. The ported rate is the feature; the top-up is the market rate, and the blend is the compromise.
The lender re-checks serviceability on the $700,000 total at 6.2 percent and the household income has dropped since the original loan - the assessment fails on the top-up, and the port dies with it. The options are a smaller purchase, a smaller top-up or a full refinance at market rates. The old 3.19 percent rate was portable only with the lender that set it, which is the feature's limit. The port is a feature of the loan, and the loan is the lender's to re-approve.
Mistake: Assuming porting is automatic.
Why it bites you: The lender re-values the new property and re-checks serviceability on the total at current rates, and a failed check kills the port. Approval in writing comes before the sale is unconditional.
Mistake: Expecting the old rate on the top-up.
Why it bites you: The ported balance keeps its rate; everything above it prices at today's market. The blended rate sits between the two, not at the old one.
Mistake: Porting without checking the feature at application.
Why it bites you: Not all loans are portable, and some lenders cap the ported balance or charge a fee. The feature is checked at application, not at moving day.
Mistake: Selling first and porting second.
Why it bites you: The port needs the lender's approval and the new security before the old loan discharges, and the sequence matters. Brent sold first, and the serviceability check that failed was his exit strategy.
I spent an evening running the port-versus-refinance arithmetic across three rate scenarios so you don't have to. The port wins whenever the old rate is below the market - the blended rate on a 3.19 percent port beats a full 6.2 percent refinance by roughly $700 a month on a $700,000 loan - and the re-approval is the part that decides whether the win is available.
Brent's port died on a serviceability check he did not know was coming, which is the standard way to lose a below-market rate in one sale. I check portability at application, get the approval in writing before the sale goes unconditional, and treat the blended rate as the number the whole move prices on. The port keeps the rate. It does not keep the approval.
Most lenders allow the fixed rate to port to the new property for the ported balance, and any top-up prices at current rates. The lender's re-approval applies either way.
Yes - because the loan is not exited, the bank's economic loss charge does not apply. Breaking the same fixed loan mid-term can cost thousands in cash.
Yes - the lender re-values the new property and re-checks serviceability on the total borrowing at current rates. A failed assessment kills the port.
The offset stays with the loan account, which continues for the ported balance with its features intact. Check the lender's product terms, because offset arrangements vary.
Porting wins when the old rate is below the current market, because it keeps the rate and skips break costs. Refinancing wins when the market rate is better or the port fails its assessment.
Disclaimer: This information is general in nature and does not constitute financial or legal advice. Always consult a qualified professional for your specific situation.

Financial Chaos Analyst
Ivy Sinclair-Wren is a Financial Chaos Analyst covering investing, AI, wealth psychology, and the emotional consequences of opening finance apps during market crashes. Based in Melbourne, she specializes in demystifying the Australian tax code and helping users navigate the intersection of spreadsheet logic and human irrationality.